|
Takeda Intake - Nissan 370Z
|
|
2008-2012 370Z K&N Typhoon Short Ram Intakes
|
|
AEM Nissan 370z ETI Intake - Silver piping
|
List Price: $434.39
Our Price: $299.00
You save $135.39!
|
|
|
List Price: $599.21
Our Price: $299.60
You save $299.61!
|
|
|
List Price: $699.00
Our Price: $430.30
You save $268.70!
|
|
|
|
|
|
|
Takeda combines years of research, cutting edge design and advanced in house testing facilities to develop some of the best performing and most versatile sport compact intake systems available. The Takeda Retain series short ram intakes feature zero-memory polyurethane couplers and clear coated and mandrel bent polished aluminum piping that provides power as well as eye catching good looks. Every Takeda intake is capped with their top of the line ProDry S dry flow oil-free synthetic media filter for the ultimate in convenience, performance and engine protection. All Takeda intakes are flow tested and dyno tuned in house with an emphasis on mid-range power, giving your G37 or 370Z more usable power and torque response in daily and real-world driving situations. Takeda has measured gains up to 9hp and 8ft/lbs of torque with their Retain series short ram intake system alone. Takeda intakes come complete with all installation hardware as well as step by step photo instructions for a simple bolt-on installation. Part number TR-3009P
|
Built for performance as well as looks, the K&N Typhoon Dual Intake System replaces the factory air filter and air intake housings with smooth, mandrel bent intake pipes and K&N's famous conical high flow air filters. K&N intakes are designed to dramatically reduce intake restriction allowing more air flow to your engine, which means more usable power and acceleration throughout the entire RPM range: K&N claims 14.2 HP @ 5600RPMs! All K&N performance products are backed by a million mile limited warranty, so you know you are getting one of the best products possible from one of the most respected names in automotive performance. Part number 69-7078TS
|
AEM's new Electronically Tuned Intake (ETI) Systems are raising air intake engineering standards once again. The 370Z uses a Mass Air flow (MAF) sensor to determine the air flow rate into the engine and meter fuel according to input from the sensor. The relation between the voltage output of the sensor and mass air flow is adversely affected by a shift to a larger diameter intake tube as the airspeed is reduced. This causes the MAF sensor to 'under report' air flow causing a lean condition at worst and a CEL at best. With a revolutionary ETI module and fully integrated design, AEM's air intake system adjusts the sensor electronically to read proper air density instead of using physical tube designs intended to "trick" the MAF reading. The result is bigger horsepower and torque gains out of an already very efficient engine: 9.67 HP at 7100 RPM according to AEM! Part number 41-1001C
|
|
|
|
AEM Nissan 370z ETI Intake - Polished piping
|
|
AEM Nissan 370z Nismo Edition ONLY - Gunmetal piping
|
|
AEM Nissan 370z Nismo Edition ONLY - Polished piping
|
List Price: $699.00
Our Price: $430.30
You save $268.70!
|
|
|
List Price: $699.00
Our Price: $430.30
You save $268.70!
|
|
|
List Price: $699.00
Our Price: $430.30
You save $268.70!
|
|
|
|
|
|
|
|
AEM's new Electronically Tuned Intake (ETI) Systems are raising air intake engineering standards once again. The 370Z uses a Mass Air flow (MAF) sensor to determine the air flow rate into the engine and meter fuel according to input from the sensor. The relation between the voltage output of the sensor and mass air flow is adversely affected by a shift to a larger diameter intake tube as the airspeed is reduced. This causes the MAF sensor to 'under report' air flow causing a lean condition at worst and a CEL at best. With a revolutionary ETI module and fully integrated design, AEM's air intake system adjusts the sensor electronically to read proper air density instead of using physical tube designs intended to "trick" the MAF reading. The result is bigger horsepower and torque gains out of an already very efficient engine: 9.67 HP at 7100 RPM according to AEM! Part number 41-1001P
|
AEM's new Electronically Tuned Intake (ETI) Systems are raising air intake engineering standards once again. The 370Z uses a Mass Air flow (MAF) sensor to determine the air flow rate into the engine and meter fuel according to input from the sensor. The relation between the voltage output of the sensor and mass air flow is adversely affected by a shift to a larger diameter intake tube as the airspeed is reduced. This causes the MAF sensor to 'under report' air flow causing a lean condition at worst and a CEL at best. With a revolutionary ETI module and fully integrated design, AEM's air intake system adjusts the sensor electronically to read proper air density instead of using physical tube designs intended to "trick" the MAF reading. The result is bigger horsepower and torque gains out of an already very efficient engine: 9.67 HP at 7100 RPM according to AEM! Part number 41-1002C
|
AEM's new Electronically Tuned Intake (ETI) Systems are raising air intake engineering standards once again. The 370Z uses a Mass Air flow (MAF) sensor to determine the air flow rate into the engine and meter fuel according to input from the sensor. The relation between the voltage output of the sensor and mass air flow is adversely affected by a shift to a larger diameter intake tube as the airspeed is reduced. This causes the MAF sensor to 'under report' air flow causing a lean condition at worst and a CEL at best. With a revolutionary ETI module and fully integrated design, AEM's air intake system adjusts the sensor electronically to read proper air density instead of using physical tube designs intended to "trick" the MAF reading. The result is bigger horsepower and torque gains out of an already very efficient engine: 9.67 HP at 7100 RPM according to AEM! Part number 41-1002P
|
|
|
|
Injen cold air 370Z - Black Intake
|
|
Injen cold air 370Z - Polished Intake
|
|
Injen cold air Nismo Edition 370Z ONLY - Black Intake
|
List Price: $740.00
Our Price: $459.00
You save $281.00!
|
|
|
List Price: $740.00
Our Price: $459.00
You save $281.00!
|
|
|
List Price: $750.00
Our Price: $459.00
You save $291.00!
|
|
|
|
|
|
|
Each 6061, T-6 aluminum alloy intake is finished off with an Injen performance dry air filter with built-in velocity stack. A replacement windshield reservoir bottle is included for best fitment. Includes stainless steel clamps, high quality silicone hoses, and instructions. Part number SP1989BLK
|
Each 6061, T-6 aluminum alloy intake is finished off with an Injen performance dry air filter with built-in velocity stack. A replacement windshield reservoir bottle is included for best fitment. Includes stainless steel clamps, high quality silicone hoses, and instructions. Part number SP1989P
|
Each 6061, T-6 aluminum alloy intake is finished off with an Injen performance dry air filter with built-in velocity stack. A replacement windshield reservoir bottle is included for best fitment. Includes stainless steel clamps, high quality silicone hoses, and instructions. Part number SP1990BLK
|
|
|
|
Injen cold air Nismo Edition 370Z ONLY - Polished Intake
|
|
|
|
|
List Price: $750.00
Our Price: $459.00
You save $291.00!
|
|
|
|
|
|
Each 6061, T-6 aluminum alloy intake is finished off with an Injen performance dry air filter with built-in velocity stack. A replacement windshield reservoir bottle is included for best fitment. Includes stainless steel clamps, high quality silicone hoses, and instructions. Part number SP1990P
|
|
|
